Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Dipped Beam Headlamp Bulb on the Renault T480

Model: Renault Trucks T MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Headlight bulb

Video tutorial

If the dipped beam headlamp bulb on the Renault T480 blows, replace it as soon as possible for your safety and to avoid penalties. Position yourself in front of the headlamp containing the bulb to be replaced, and loosen the two screws behind the headlamp using a Torx key, located inside the access step to the cabin.

You can then rotate the headlamp forward to access the bulb housing. Remove the rubber cover and pull out the bulb from the connector.

Insert the new H7 bulb, taking care not to touch the glass with bare fingers, place the bulb in its socket, and replace the rubber cover. Rotate the headlamp back and secure it with the two screws.


Updated on 27 September 2026 by ScegliAuto


Related tutorials

How to replace a headlight in the Renault Truck T
How to replace a headlight in the Renault Truck T
Renault Trucks T (2013-2024 / MK 1) In this video we see how to change the front headlight of a Renault T model truck: it is an operation that we can do entirely from the outside, becau…
How to connect the vehicle radio to the phone's Bluetooth on the Renault Trucks T
How to connect the vehicle radio to the phone's Bluetooth on the Renault Trucks T
Renault Trucks T (2013-2024 / MK 1) Connecting the phone to the vehicle's Bluetooth on a Renault Trucks T is a simple and quick operation that you can do independently. Place the phone …
How to reset the warning light on the Renault Trucks T?
How to reset the warning light on the Renault Trucks T?
Renault Trucks T (2013-2024 / MK 1) To reset the service warning light on Renault Trucks T vehicles, connect the vehicle to the diagnostic computer via the OBD port. To reset the light …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos