Do it yourself
Frequently asked questions about cars and motorcycles

How to enable or disable cruise control on the Renault Clio IV

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Instrument cluster

In this video we can see how to enable and disable the Cruise control function on the Renault Clio IV: the button for activation/deactivation is located on the central console, near the gear knob: it is a toggle button, so press it on the lower part and in this way we will have enabled the automatic speed control, and we will see the icon appear on the dashboard. Accelerate to the desired speed and press the "R" button located on the right side of the steering wheel. In this way we will have set the cruise speed. Through the buttons on the left, we can increase or decrease the previously set speed. By pressing the "0" button on the right, we can cancel or pause the cruise speed. To disable the Cruise, push the button on the central console to the middle position.

Posted on 5 May 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Clio (2019-2026 / Clio V, Clio 5) Today, let's discover the steps that will allow us to activate and deactivate the speed limiter on the Renault Clio by following the instructions bel…
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) This article covers the layout and use of the buttons found on the steering wheel of the Renault Clio IV: on the left side, there is the panel for sp…
Renault Clio (2019-2026 / Clio V, Clio 5) In this tutorial we can see how to use Cruise Control in the Renault Clio, an extremely simple and fast operation. This system should only be used on…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos