Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Hazard Light Button on the Renault Trafic 2

Model: Renault Trafic MK 2 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Push button

See other generations:
Video tutorial

When one of the buttons on your dashboard stops working, it needs to be replaced. This operation can be performed independently, aided by our brief video tutorial.

To carry out this task on a Renault Trafic model 2, remove the button using a flat-head screwdriver, then disconnect the connector and completely remove the button. At this point, purchase a new button from an online retailer or an auto parts store, connect the new button to the connector, and then insert the button back in.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the 2014 Renault Trafic
How to Reset the Service Light on the 2014 Renault Trafic
Renault Trafic (2001-2014 / MK 2) The procedure required to manually reset the service light on your 2014 Renault Trafic is practically identical to that used in many other Renault mo…
How to Replace the Front Headlight Bulb on a Renault Trafic
Renault Trafic (2001-2014 / MK 2) Removing the front headlight bulb on a Renault Trafic is a straightforward task that can be done independently in just a few minutes. First, switch o…
How to Reset the Tyre Light on a 2022 Renault Trafic?
How to Reset the Tyre Light on a 2022 Renault Trafic?
Renault Trafic (2014-2026 / MK 3) This video tutorial uses a 2022 Renault Trafic, but the procedure shown applies to all phase three models of this vehicle, valid for all Renault Traf…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos