Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Instrument Cluster Lights of a Renault Clio

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Instrument panel light

See other generations:
Video tutorial

Today's instructions will show you the main steps on how to remove and replace the bulbs of the instrument cluster of a Renault Clio. First, get inside the cabin and begin by removing the plastic cover found at the top of the instrument cluster, gently releasing all the clips found at the back; then remove the instrument cluster by disconnecting the various electrical connectors, as illustrated in the video.

At this point, remove and replace the small bulbs located behind the instrument cluster, ensuring they have the same fitting, and finally reassemble everything!


Updated on 2 October 2026 by ScegliAuto


Related tutorials

How to turn the position lights on and off in the Renault Clio 3
How to turn the position lights on and off in the Renault Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) Turning the position lights on and off in the Renault Clio model 3 is very simple. First, get into the car and turn on the ignition; with the key ins…
Removing Headlight Lights on Renault Clio
Removing Headlight Lights on Renault Clio
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) To replace blown bulbs in the Clio headlight, let's look at removing the front headlight. Open the front bonnet by pulling the lever located at the b…
Removing the Rear Light and Replacing Bulbs on Renault Clio 3
Removing the Rear Light and Replacing Bulbs on Renault Clio 3
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) This guide shows how to remove the rear light and replace the bulbs on the third series Renault Clio, following these simple steps. First, open the t…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos