Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Radio from the Renault Twingo

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Car stereo

See other generations:
Video tutorial

Removing the radio unit from the Renault Twingo is a straightforward operation that may be necessary when the radio stops working and needs to be replaced. To remove the radio, first take off the plastic trim surrounding it by inserting a small flathead screwdriver.

Once the trim is removed, take out the radio and then, using the same method, remove the main body of the radio and disconnect the connector. After completing these steps, you can install the new radio.


Updated on 3 October 2026 by ScegliAuto


Related tutorials

How to Replace and Install the Radio in the Renault Twingo
How to Replace and Install the Radio in the Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) The instructions in this guide will show you how to replace and install the radio in the Renault Twingo. First, get inside the cabin and start by rem…
How to Replace the Standard Stereo in a Renault Twingo
How to Replace the Standard Stereo in a Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Let's discover the main information needed to remove and replace the standard stereo in a Renault Twingo. First, get inside the vehicle and start by …
How to Remove the Radio from a Renault Twingo 1
How to Remove the Radio from a Renault Twingo 1
Renault Twingo (1993-2007 / Twingo 1) This video provides step-by-step instructions for removing the original radio from the first generation Renault Twingo. First, get inside the vehicle…

How to lower the rear seats in the Peugeot 206?

In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos