Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to replacing the front headlights of the Renault Master

Model: Renault Master MK 3 - Years 2010-2023
Part: Headlight

Today's guide will show us how to disassemble and replace the front headlight and its bulbs of the Renault Master, following the instructions below. First, we open the hood and start disassembling and removing the front bumper; to do this, we unscrew the fixing screws located on the top of it and on both sides of the front wheel arches, as shown in the video. Once the bumper is removed, we can unscrew all the screws of the headlight assembly, disconnecting the electrical connector to remove it; replace the entire headlight or just the bulbs if necessary, then reassemble everything!

Posted on 31 May 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

Guide to replacing the rear brake pads of the Renault Master.
Guide to replacing the rear brake pads of the Renault Master.
Renault Master (2010-2023 / MK 3) Today's guide will show us the main steps on how to disassemble and replace the rear brake pads of the Renault Master. As a first step, we lift the v…
Where are the fuses located in the Renault Master?
Where are the fuses located in the Renault Master?
Renault Master (2010-2023 / MK 3) The fuses of the Renault Master are located inside fuse boxes that are installed on the vehicle: in this model it is possible to find two boxes, one …
Replacement of the headlights bulbs of the Renault Master.
Replacement of the headlights bulbs of the Renault Master.
Renault Master (2010-2023 / MK 3) Let's see how to proceed to replace the low beam bulb of the front headlight of the Renault Master. We open the engine hood and position ourselves in…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos