Do it yourself
Frequently asked questions about cars and motorcycles

How do you set the time on the Renault Megane 3?

Model: Renault Megane Megane III, Megane 3 - Years 2008-2015
Part: Checks and maintenance

If you need to change the time in the Renault Megane 3, you can take inspiration from the video posted here, realizing how simple and quick this operation is, manageable independently and without the intervention of specialized personnel. Turn on the radio, press the multifunction button, access the Menu options, select System Settings and Clock. At this point, rotate the radio knob and adjust the hours and minutes, saving your setting by pressing the same knob.

Posted on 8 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Renault Megane (2008-2015 / Megane III, Megane 3) In this article, you will learn the procedure to adjust the time on the Renault Megane 3. The procedure is quick and takes little time to complete. F…
Renault Megane (2002-2010 / Megane 2) This tutorial shows how to adjust the time on a Renault Megane, a very simple and quick operation, for example after a time change or after replacing…
Renault Megane (2008-2015 / Megane III, Megane 3) In this tutorial, you can see how to set the time on a Renault Megane, an extremely simple and quick operation to perform, for example, after disconn…

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - Where is the internal temperature sensor located in the Renault Megane? Read answer
    • Megane 2008-2015 - What does the Renault Megane "Risk of engine failure" label mean? Read answer

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos