Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Instrument Cluster in the Renault Grand Scenic?

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Instrument cluster

See other generations:
Video tutorial

In this tutorial, see how to remove the instrument cluster in the Renault Grand Scenic, an extremely simple and quick operation. First, ensure that the key is not inserted for safety, then pry along the edge of the cluster using a plastic spatula if possible.

Once done, unscrew the two side fixing screws using a Torx T20 key, grasp the module and pull it out of the dashboard. At this point, disconnect the internal connector and install the replacement by following the reverse procedure.


Updated on 5 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Renault Scenic - Grand Scenic
How to Reset the Service Light on a Renault Scenic - Grand Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) In this short and simple guide, we will see the procedure to reset the service light on a Renault Scenic and Grand Scenic. First, get inside the vehi…
How to Manually Release the Handbrake on the Renault Grand Scenic
How to Manually Release the Handbrake on the Renault Grand Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) To manually release the handbrake on the Renault Grand Scenic, follow the steps shown in the video. First, press the brake pedal: while holding it do…
How to Reset the "Service" Light on a Renault Grand Scenic?
How to Reset the "Service" Light on a Renault Grand Scenic?
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) To reset the "Service" light on a Renault Grand Scenic, follow these steps. First, turn on the ignition without starting the engine. Use the buttons …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos