Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the battery management sensor of a Renault

Model: Renault Renault Various
Part: Warning light – error code

In this video, we see how to reset the battery management sensor after we have changed it on a Renault car. We will need to use the satellite located at the end of the lever on the right side of the steering wheel of our car. Here there are buttons that are used to scroll through the menus up and down. In this case, however, they are used to delete the message referring to the changed battery; we look for it with the search buttons and then it will be enough to hold down the button with the up arrow for a few seconds until the message disappears from the display.

Posted on 22 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Fix the Turbo Sensor Error on a Renault Vehicle
How to Fix the Turbo Sensor Error on a Renault Vehicle
Renault Renault Various In this video, see how to resolve the turbo upstream sensor error, which triggers the anti-pollution warning light on Renault vehicles: if the turbo …
How do you reset the tire pressure warning light of the Renault Triber?
How do you reset the tire pressure warning light of the Renault Triber?
Renault Renault Various In order to reset the tire pressure warning light of the Renault Triber, you need to inflate the tires to the recommended pressure value: this value …
How to check the Renault injection system: causes and solutions
How to check the Renault injection system: causes and solutions
Renault Renault Various In this video, we will see what it means when a generic engine light comes on, indicating that there is an issue with the engine management system. M…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos