Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install Subwoofer Cables in a Renault Megane II

Model: Renault Megane Megane 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Car stereo

See other generations:
Video tutorial

In this video, you will see how to install subwoofers in a Renault Megane II: first, disconnect the negative terminal from the battery, and then remove the covers along the driver's side, where the cables will be hidden, including on the left passenger side.

Do not reconnect the battery terminals until you have completed the entire job. The YouTuber provides a valuable tip: when installing subwoofers in your Megane, it is necessary to upgrade the OE speakers, as they are sufficient to keep up. However, he was unable to connect the capacitor, only the resistor, due to the instructions being in German.

This video is solely for the cable routing; the radio installation is shown in another video. For safety reasons, it is advisable to install the fuse as close as possible to the battery terminal.


Updated on 12 October 2026 by ScegliAuto


Related tutorials

How to Use the Manual Key in the Renault Megane?
How to Use the Manual Key in the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) In the Renault Megane, it can happen that the remote battery is flat, making it seemingly impossible to unlock the lock. In this tutorial, you will s…
Where Are the Fuses on the Renault Megane?
Where Are the Fuses on the Renault Megane?
Renault Megane (2008-2015 / Megane III, Megane 3) The fuses on the Renault Megane are divided within the dedicated fuse boxes installed in the vehicle: in this model, you can find two boxes. The firs…
Where Are the Fuses Located on the Renault Megane 3?
Where Are the Fuses Located on the Renault Megane 3?
Renault Megane (2008-2015 / Megane III, Megane 3) All fuses on the Renault Megane 3 are divided within the appropriate fuse boxes installed in the car. This model has two boxes: one inside the cabin …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos