Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Renault Trafic

Model: Renault Trafic MK 2 - Years 2001-2014
Part: Service warning light

To reset the maintenance light or service light on a Renault Trafic vehicle, we need to follow some simple and quick steps. The first step is to turn on the instrument panel. The second step is to press and hold the BC button, located on the right side of the steering wheel lever. The third step is to release the button and turn off the panel when the kilometers displayed start flashing. The fourth step is to turn on the panel to verify that the reset operations were successful.

Posted on 25 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Renault Trafic 3
How to reset the service light on the Renault Trafic 3
Renault Trafic (2014-2026 / MK 3) Today we will explain the steps to reset the service light on a Renault Trafic mk3 model car on your own. To reset the service light, we need to get …
How to Reset the Service Light on the 2014 Renault Trafic
How to Reset the Service Light on the 2014 Renault Trafic
Renault Trafic (2001-2014 / MK 2) The procedure required to manually reset the service light on your 2014 Renault Trafic is practically identical to that used in many other Renault mo…
How to Reset the Service Light on Renault Trafic
How to Reset the Service Light on Renault Trafic
Renault Trafic (2014-2026 / MK 3) To reset the service light on the Renault Trafic - after performing the required operations in the service schedule - get into the vehicle and close …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos