Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the external rearview mirror of the Renault Master

Model: Renault Master MK 3 - Years 2010-2023
Part: Side mirror

Today we will see the process of disassembly and replacement of the external rearview mirror of the Renault Master, in simple and quick steps. First of all, we open the front door of the vehicle and start to disassemble and remove the triangular plastic cover of the rearview mirror; then we use a socket wrench with extension to unscrew the fixing screws of the rearview mirror, then disconnect the electrical connector, as shown in the video. At this point, we remove the mirror from the outside and replace it with the new one, finally adjusting the glass!

Posted on 15 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the External Wing Mirror on the Renault Master 2020
How to Replace the External Wing Mirror on the Renault Master 2020
Renault Master (2010-2023 / MK 3) If you own a Renault Master Mk3 (2020) and want to learn how to correctly replace the external wing mirror, simply read this guide carefully and foll…
Replacement of the turn signal bulb of the Renault Master side mirror
Replacement of the turn signal bulb of the Renault Master side mirror
Renault Master (2010-2023 / MK 3) These short and simple steps will show us how to disassemble and replace the turn signal bulb of the external rearview mirror of the Renault Master. …
How do you replace the external rearview mirror arrow of the Renault Master 3?
How do you replace the external rearview mirror arrow of the Renault Master 3?
Renault Master (2010-2023 / MK 3) If structurally the arrow or direction indicator, embedded in the external rearview mirror of your Renault Master 3, is broken, whether due to an acc…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos