Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the mirror glass of the external rearview mirror of a Renault Master II

Model: Renault Master MK 2 - Years 1997-2010
Part: Side mirror

In this video, we are shown how to change the mirror glass of an external mirror of a Renault Master II: we need to use a screwdriver (but it would be better to use a plastic spatula) while holding the mirror with the other hand wrapped in a cloth; we lever it to detach it from its base, then remove the heater wires, and now we can change our mirror glass (which is not broken here, the youtuber is just giving us an example). To remove the cover, we will now have to remove the three screws inside and then lift the four tabs slightly, then push them outwards: this before removing the mirror frame. At this point, just push to remove the cover.

Posted on 19 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the external rearview mirror of the Renault Master
How to replace the external rearview mirror of the Renault Master
Renault Master (2010-2023 / MK 3) Today we will see the process of disassembly and replacement of the external rearview mirror of the Renault Master, in simple and quick steps. First …
How to reassemble the rearview mirror of the Renault Master
How to reassemble the rearview mirror of the Renault Master
Renault Master (2010-2023 / MK 3) In this video, we see how to reassemble the external rearview mirror of the Renault Master III: we start by screwing in the turn signal bulb, and fix…
How to Replace the External Wing Mirror on the Renault Master 2020
How to Replace the External Wing Mirror on the Renault Master 2020
Renault Master (2010-2023 / MK 3) If you own a Renault Master Mk3 (2020) and want to learn how to correctly replace the external wing mirror, simply read this guide carefully and foll…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos