Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Seat Cushion

Model: Saab 9 3 MK 2 - Years 2002-2014
Part: Seat

Frequent use of the car can lead to abnormal wear of the driver's seat, potentially causing it to collapse. To replace the cushion, remove the seat and place it on a workbench for easier access. Remove the plastic caps on the sides that hide the fixing screws. Take out all the screws securing the seat base to the seat, including those hidden behind the metal parts, then disconnect the heating cables. At this point, you can completely remove the lower part of the seat. Replace this worn part with a new one that you have purchased previously.

Updated on 4 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Seat in a SAAB 93
How to Remove the Front Seat in a SAAB 93
Saab 9 3 (2002-2014 / MK 2) In this video tutorial, you can see how to remove the front seat in a SAAB 93 by following some simple steps: first, gather the tools needed to disas…
How to Remove the Rear Seats from a Saab 9-3?
How to Remove the Rear Seats from a Saab 9-3?
Saab 9 3 (2002-2014 / MK 2) In this tutorial, you will see how to remove the rear seats from a Saab 9-3, a very simple operation. For this, you will only need a long flat screwd…
How to Remove the Radio from a SAAB 9-3
How to Remove the Radio from a SAAB 9-3
Saab 9 3 (2002-2014 / MK 2) Before you can begin, sit in the driver's seat of your SAAB 9-3. Start by unclipping and removing the air vents located above the radio using a flath…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos