Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Saab
    3. :
  3. 9 3
    4. : Remove key from Saab 9 3

Saab 9 3 - Video tutorial

Model: Saab 9 3 MK 2 - Years 2002-2014
Part: Key
Operation: Remove key from Saab 9 3

Removing the key of a Saab 9 3. Let's see how to remove the key and replace the dead battery. We take our ignition key and go to extract the key inside. We pry with a screwdriver between the plastics until they separate. We remove the empty battery with a screwdriver and take a new one of the same size and voltage. After placing the battery in the key, mount the two parts of the key remote control covers until you hear the lock click. We check the exact operation of the key remote control. We press the keys to unlock the door locks.


Posted on 19 December 2023 by ScegliAuto



How to bind the key on Saab 9-3
Saab 9 3 (2002-2014 / MK 2) In this video tutorial we will see how to associate the key on the Saab 9-3, in case you have replaced it with a new one. In the initial stages of th
How to disassemble the car radio of a SAAB 9 3
Saab 9 3 (2002-2014 / MK 2) Before we are able to start, we will have to go and sit in the driver's seat of our SAAB 9-3. So let's start by disengaging and removing the air vent
How to replace the key shell of the Saab 93
Saab 9 3 (2002-2014 / MK 2) Remove the part where the key ring hooks, pulling it outwards, in this way you will extract the metal key of your car, and always helping with the la

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos