Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Saab
    3. :
  3. 9 5
    4. : Kit for silicone suction hose modification

Saab 9 5 - Video tutorial

Model: Saab 9 5 MK 1, Ys3e - Years 1997-2010
Part: Accessory Kit
Operation: Kit for silicone suction hose modification

For the modification it is necessary to obtain the complete kit. Start by disconnecting the negative pole of the battery then disconnect the sensor connector located on the air duct. Completely disassemble the air filter box by removing all the pipes connected to it, then remove it completely from the engine compartment. Prepare the new accessory by carefully following the attached instructions. Insert the new filter holder in place of the old box and connect the various pipes. Insert the sensor into its new housing and secure it with the screws. Insert the new air filter, connect the sensor and reactivate the battery. Do a test to check the performance of the car.


Posted on 18 July 2023 by ScegliAuto



Disassembly and replacement of the petrol filter
Saab 9 5 (1997-2010 / MK 1, Ys3e) The fuel filter is a component that must be replaced regularly. To proceed with this operation it is necessary to wear protective goggles and rubber
Replacement of cylinder head fixing pins
Saab 9 5 (1997-2010 / MK 1, Ys3e) When disassembling the cylinder head to replace its gasket, it is preferable to use a new set of pins to secure it; first of all, pass the threads of
Protect the windshield with thin films
Saab 9 5 (1997-2010 / MK 1, Ys3e) Over time, the windshield loses its original luster due to rubbing with sand and other agents, while for maximum visibility it must be perfectly tran

How do you open the fuel flap of the Volkswagen Golf 5?

In order to open the fuel flap of the Volkswagen Golf 5, you need to press the appropriate button inside the passenger compartment, which is located in the rear part of the glove box on the driver's door. By pressing the button, the flap will unlock and it will then be possible to open it manually. Once the flap has been opened, the fuel tank access cap must be unscrewed. To close everything again, it will be sufficient to screw the tank cap again; subsequently, the flap must also be closed, pressing it so that it fits thanks to its locking mechanism.

Watch the video!


by ScegliAuto

More videos