Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Air Filter Replacement

Model: Saab 9 5 Ys3e, MK 1 - Years 1997-2010
Part: Air filter

The engine air filter housing is located at the front right of the vehicle, just behind the panel: to remove the old filter, it is not necessary to open the bonnet; simply unscrew the fixing screws of the cap of the filter housing. Once the screws (4 Torx screws) are removed, pull out the old cylindrical filter and insert the new one by placing it in the centre of the cap in the designated slot. Refit by tightening the fixing screws. The new filter will ensure the correct airflow to the engine, allowing for much smoother performance, especially in fuel consumption.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Cabin Air Filter
How to Change the Cabin Air Filter
Saab 9 5 (1997-2010 / Ys3e, MK 1) When you take your car for a service, it is easy to forget about a very important filter: the cabin air filter. It filters the air coming from outsid…
Silicone Intake Hose Modification Kit
Silicone Intake Hose Modification Kit
Saab 9 5 (1997-2010 / Ys3e, MK 1) For the modification, you need to obtain the complete kit. Start by disconnecting the negative terminal of the battery, then disconnect the sensor co…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Saab 9 5 (1997-2010 / Ys3e, MK 1) The cabin air filter is located behind the centre console and to access it, follow this disassembly sequence. From the passenger side of the cabin, f…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos