Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Saab
    3. :
  3. 900
    4. : Radio and dashboard installation

Saab 900 - Video tutorial

Model: Saab 900 MK 2 - Years 1993-1998
Part: Car stereo
Operation: Radio and dashboard installation

To do this you need to remove the old unit so as to connect the new unit to your car. To do this, you must check that all the components necessary for installation are present and that they are of the right size for your vehicle. It is necessary to remove the various components of the dashboard and disconnect the wiring of the main radio unit. The antenna, which is a thick black wire, must then be disconnected and the new kit purchased is assembled, making sure that the wiring is well connected. Once this is done, the new car radio can be inserted into the dashboard and it can be reassembled.


Posted on 25 July 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos