Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery of the Seat Ibiza 3

Model: Seat Ibiza 6J, 6P - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Battery

See other generations:
Video tutorial

The following video tutorial will explain how to replace the battery of the Seat Ibiza 3 on your own. First, we need to pull the hood release lever and once the hood is open, locate the battery on the right side of the engine compartment. Using a socket wrench with a 13 extension, unscrew the battery support plate.

Disconnect the negative terminal from the battery using a 10 socket wrench and then disconnect the positive terminal using the same wrench. Remove the old battery and insert the new one. Connect the positive terminal using a 10 socket wrench and then the negative terminal.

Use a 13 socket wrench to screw the battery support plate.


Posted on 8 January 2025 by ScegliAuto


Related tutorials

Battery replacement for Seat Ibiza 1.2
Battery replacement for Seat Ibiza 1.2
Seat Ibiza (2008-2017 / 6J, 6P) Below we will see the main instructions that will allow us to disassemble and replace the battery of the Seat Ibiza 1.2 vehicle. First, we open the h…
How to change the battery of the key for the 2008 Seat Ibiza
How to change the battery of the key for the 2008 Seat Ibiza
Seat Ibiza (2002-2009 / 6L) In the following article, we will show how to replace the battery of the 2008 Seat Ibiza key. For this procedure, a flathead screwdriver will be nece…
Information on the Fuse Diagram of the Seat Ibiza 6J
Information on the Fuse Diagram of the Seat Ibiza 6J
Seat Ibiza (2008-2017 / 6J, 6P) This video provides information regarding the fuses of the Seat Ibiza; these are shown on a specific diagram. The fuses of the Seat Ibiza are located…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos