Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the thermostat of the Seat Ibiza 1.4

Model: Seat Ibiza 6L - Years 2002-2009
Part: Thermostat

Today's information will illustrate the process of disassembling and replacing the thermostat of the Seat Ibiza 1.4, in simple steps. First, we open the hood of the car and start disconnecting the thermostat tubing found on the lower part of the engine compartment; we let the coolant drain into a container for about ten minutes, as shown in the video. At this point, we unscrew all the thermostat screws to remove it, also disconnecting the electrical connector; we replace the thermostat with the original one, following the video tutorial until the end!

Posted on 16 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the thermostat on the Seat Ibiza/Leon
Seat Ibiza (2008-2017 / 6P, 6J) To proceed with the removal of the vehicle's thermostat, follow these steps: open the bonnet and first drain the coolant by unscrewing the cap locate…
Information on the Fuse Diagram of the Seat Ibiza 6J
Information on the Fuse Diagram of the Seat Ibiza 6J
Seat Ibiza (2008-2017 / 6P, 6J) This video provides information regarding the fuses of the Seat Ibiza; these are shown on a specific diagram. The fuses of the Seat Ibiza are located…
What is the Fuse Diagram for the Seat Ibiza?
What is the Fuse Diagram for the Seat Ibiza?
Seat Ibiza (2008-2017 / 6P, 6J) In this video, you will see the fuse diagram for the Seat Ibiza and the location of the respective fuse boxes, useful in case you need to check the f…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos