Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the thermostat on a Seat Ibiza

Model: Seat Ibiza 6P, 6J - Years 2008-2017
Part: Thermostat

In this video we can see how to change the thermostat on a Seat Ibiza 6P: we remind you that this operation must be strictly done with the engine cold. In the video we can see the position of the component, which is fixed by two screws. Previously, we will need to get some antifreeze, as by removing the thermostat, we will lose some. We see the comparison between the worn thermostat, which could not close, and the new one: the failure to close was the reason why the car could not reach the correct working temperature. We can find the replacement for example on euautopezzi. It: we will have to select our car model, but the cost is around 10 euros.

Posted on 22 December 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the thermostat of the Seat Ibiza 1.4
Replacement of the thermostat of the Seat Ibiza 1.4
Seat Ibiza (2002-2009 / 6L) Today's information will illustrate the process of disassembling and replacing the thermostat of the Seat Ibiza 1.4, in simple steps. First, we open …
How to replace the thermostat on the Seat Ibiza/Leon
Seat Ibiza (2008-2017 / 6P, 6J) To proceed with the removal of the vehicle's thermostat, follow these steps: open the bonnet and first drain the coolant by unscrewing the cap locate…
How to Replace the Thermostat on a Seat Ibiza
How to Replace the Thermostat on a Seat Ibiza
Seat Ibiza (2008-2017 / 6P, 6J) To replace the thermostat on a Seat Ibiza, go under the car and disconnect the coolant hose, placing a container underneath to catch the fluid. Now, …

Other guides you may be interested in

How to replace the horn on a Renault Duster - Dacia Duster

Today's main instructions will show you the procedure for removing and replacing the horn or sound signal on the Renault Duster, as well as the Dacia Duster. First, open the bonnet of the vehicle and start removing the front bumper by unscrewing all the fixing screws; you will find the horn right in front of the radiator, as shown in the video. At this point, disconnect the electrical connector and unscrew the bracket screw to remove and replace the horn with the new one; finally, reassemble the front bumper!

Watch the video!


by ScegliAuto

More videos