Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the air filter on the Seat Ateca

Model: Seat Ateca MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Air filter

Video tutorial

Let's see how to change the air filter on the Seat Ateca: we find it in a large rectangular box inside the engine compartment. It will be necessary to remove the screws and clamps that hold it in place, and remove the air intake pipe.

Let's start by removing the screws, then the clips and the pipes that are inserted under pressure, being careful not to lose the screws inside the engine. We then remove the entire box containing the filter and remove the cover from the box (maybe we put it on a bench, so we are more comfortable).

Inside we will find two filters; we remove them, clean the container from dust and residues, and replace the two filters with two new and clean ones. All that's left is to close the box and put it back in place, reconnecting the pipes and the intake pipe.


Posted on 17 June 2025 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the Seat Ateca
How to replace the cabin air filter of the Seat Ateca
Seat Ateca (2016-2025 / MK 1) If you want to replace the air filter inside the cabin of your Seat Ateca by yourself, just carefully read the procedure described in our new guide a…
Replacing the cabin air filter of the Seat Ateca
Replacing the cabin air filter of the Seat Ateca
Seat Ateca (2016-2025 / MK 1) Today, we will see the step-by-step instructions for removing and replacing the cabin air filter of the Seat Ateca. First, open the front door of the…
How to Change the Oil and Oil Filter in the Seat Ateca
How to Change the Oil and Oil Filter in the Seat Ateca
Seat Ateca (2016-2025 / MK 1) Below you will find information on how to change the oil and its corresponding filter in your Seat Ateca. The steps are very simple and similar to ma…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos