Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Ibiza
    4. : How to remove the headlight on Seat Ibiza

Seat Ibiza - Video tutorial

Model: Seat Ibiza 6L - Years 2002-2009
Part: Headlight
Operation: How to remove the headlight on Seat Ibiza

Let's see how to remove the headlight on Seat Ibiza: open the bonnet by pulling the hood opening lever and put it in safety. After removing the front bumper, we unscrew the locking pins at the top of the headlight with a socket wrench or cordless screwdriver. At this point we will find other pins in the lower part of the lighthouse: let's unscrew them from the metal bar. We assemble the new headlight with the new bulbs if damaged and (always suitable type and size) we insert the headlight in its housing. Finally we tighten the pins of the lighthouse with the socket wrench. We test the correct functioning of the lights.


Posted on 29 October 2023 by ScegliAuto



How to replace the front headlight bulb of the Seat Ibiza.
Seat Ibiza (2008-2017 / 6P, 6J) This short guide will show you the steps on how to disassemble and replace the headlight bulb of the Seat Ibiza. First, we open the engine hood of ou
How do you replace the front headlight bulb of a Seat Ibiza?
Seat Ibiza (2008-2017 / 6P, 6J) Replacing the headlight bulb of the Seat Ibiza is done by opening the hood, so that access to the cover located inside the headlight can be obtained:
How to replace the headlight bulbs in the Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) Replacing the headlight bulbs on your Seat Ibiza is an extremely simple and fast operation, let's see how to proceed in this tutorial. Before doing t

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos