Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine air filter of the Seat Toledo

Model: Seat Toledo KG, MK 4 - Years 2012-2019
Part: Air filter

In the following guide you will find the description of all the steps you need to apply to safely replace the engine air filter of your third series Seat Toledo. Before starting, get a Torx T20 key and obviously also a new air filter compatible with the vehicle. Once you have done this, lift the front hood of your Seat Toledo and then locate the box containing the air filter. Then use the Torx T20 key to unscrew all the various screws of the protective cover and remove it. Finally, replace the old filter with the new one.

Posted on 18 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to change the motor oil of the Seat Toledo
How to change the motor oil of the Seat Toledo
Seat Toledo (2012-2019 / KG, MK 4) If you want to change the motor oil of your latest series Seat Toledo by yourself, all you need to do is carefully read the following guide and follo…
How to Remove the Window Switch Panel on a Seat Toledo?
How to Remove the Window Switch Panel on a Seat Toledo?
Seat Toledo (1998-2004 / MK 2, 1M) To remove the window switch panel on a Seat Toledo, use a tool to pry off the trim along the panel, just below the switch panel. Once this is detache…
How to Service the Seat Toledo
How to Service the Seat Toledo
Seat Toledo (1998-2004 / MK 2, 1M) In today's video, learn how to perform the basic service (i.e., replacing the oil filter and engine oil) on the Seat Toledo. First, work only with a …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos