Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Ibiza
    4. : How to remove the front right door panel of a Seat Ibiza

Seat Ibiza - Video tutorial

Model: Seat Ibiza 6P, 6J - Years 2008-2017
Part: Door panel
Operation: How to remove the front right door panel of a Seat Ibiza

We perform the disassembly of the front right door panel of a Seat Ibiza. We disconnect the battery terminals in the engine compartment; with a screwdriver we unscrew the screws placed in the space of the handle (after removing the plastic coating). Remove the plastic covering near the door opening lever, unscrew the screws left on the door panel and detach the clips fastening it. Finally, remove the panel with your hands and unhook it from the door (disconnect the power cables and the opening cable). We carry out the desired maintenance inside the door.


Posted on 15 November 2023 by ScegliAuto



How to disassemble the front door panel of the Seat Ibiza
Seat Ibiza (1993-2002 / 6K) These short and simple instructions will show us how to disassemble and replace the front door panel of the Seat Ibiza. First of all, we open the fro
How to replace the inside handle of a Seat Ibiza
Seat Ibiza (2002-2009 / 6L) Let's start by opening the door of our Seat Ibiza. After that, we will have to disassemble and remove the door panel, unscrewing the fixing screws an
Seat Ibiza door panel removal
Seat Ibiza (2002-2009 / 6L) In today's video tutorial we will see how to remove the door panel of a second generation Seat Ibiza. First, let's open the front door and remove all

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos