Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Seat Leon

Model: Seat Leon 1P - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

Below are the instructions on how to correctly reset the service light on a Seat Leon. The steps are very simple and quick. First, with the engine off, press the button located under the odometer for a few seconds, then turn on the ignition.

At this point, turn the button to the right and switch off the ignition. Once done, you can turn the ignition back on, and you will notice that the light has disappeared.

As always, if this does not work, it is best to consult an expert.


Posted on 27 May 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Seat Leon 2
How to reset the service light on the Seat Leon 2
Seat Leon (2005-2013 / 1P) To manually reset the service light on your second series Seat Leon, follow the procedure described in this guide. First, get into the car and reach …
How to Reset the Service Light on a Seat Leon MK3
How to Reset the Service Light on a Seat Leon MK3
Seat Leon (2012-2019 / 5F, MK 3) In this very short video guide, you will see the necessary steps to reset the service light on a Seat Leon, MK3 model produced from 2012 to 2019. Fir…
How to reset the service indicator on the Seat Leon 3
How to reset the service indicator on the Seat Leon 3
Seat Leon (2012-2019 / 5F, MK 3) In the following guide you will find the description of all the various steps you need to follow to manually reset the service light of your Seat Leo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos