Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Door Lock on Seat Ibiza

Model: Seat Ibiza 6L - Years 2002-2009
Part: Door lock

Remove the top part of the internal handle using a plastic wedge (not metal!). Unscrew the two now-exposed screws. Move to the bottom of the door and unscrew the two corresponding screws. At this point, you can remove the door panel by disconnecting the connectors. Turn on the ignition and slightly lower the window, then open the cover caps in the door where the two 10 mm bolts securing the window are located. Unscrew them, raise the window and secure it with masking tape. Remove the cover caps and unscrew the lock screws, which you will then remove. Reassemble everything in reverse order, as shown in the video.

Updated on 1 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Lock on a Seat Ibiza?
How to Replace the Lock on a Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) In this tutorial, you will learn how to replace the lock on a Seat Ibiza, a relatively simple operation. First, open the relevant door, then unclip t…
How to Replace the Tailgate Lock on a Seat Ibiza?
How to Replace the Tailgate Lock on a Seat Ibiza?
Seat Ibiza (2008-2017 / 6P, 6J) To replace the tailgate lock on a Seat Ibiza, lift the tailgate to access the screws securing the plastic panel inside. Once the screws are loosened,…
How to Replace the Front Door Lock on a Seat Ibiza MK3
How to Replace the Front Door Lock on a Seat Ibiza MK3
Seat Ibiza (2002-2009 / 6L) In this video, learn how to remove the front door lock on a Seat Ibiza 6L, third series. Start by removing the inner door panel; open the door and th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos