Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Rear Door Panel on a Seat Leon

Model: Seat Leon MK 3, 5F - Years 2012-2019
Part: Door trim panel

In this video tutorial, follow the main instructions on how to remove the rear door panel on a Seat Leon from 2012 to 2019, in Cupra version. First, open the rear door and remove all the plastic covers found on the door panel, specifically inside the opening handle and on the grab handle; then, unscrew the screws located underneath using a Torx screwdriver, as shown in the video. At this point, start prying at the sides in several places to unclip and remove the door panel!

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the rear door panel of the Seat Leon Cupra
How to disassemble the rear door panel of the Seat Leon Cupra
Seat Leon (2012-2019 / MK 3, 5F) These short and simple instructions will show us how to disassemble and remove the rear door panel of the Seat Leon Cupra. First, we open the rear do…
How to Remove the Inner Door Panel of the Rear Door on a Seat Leon
How to Remove the Inner Door Panel of the Rear Door on a Seat Leon
Seat Leon (2020-2026 / KL1, KL8) To remove the inner door panel of the rear door on a Seat Leon, open the door and locate the fixing screws in the handle and along the lower edge of …
Disassembly of the front door panel of the Seat Leon
Disassembly of the front door panel of the Seat Leon
Seat Leon (2005-2013 / 1P) These brief steps will illustrate the process of disassembling the front door panel of the Seat Leon. First, we open the front door of the car and st…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos