Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Light Bulbs on Seat Altea

Model: Seat Altea MK 1 - Years 2004-2015
Part: Tail light

Open the boot lid and remove the cover located on the side wall of the boot. Insert your hand to remove the rear clip of the headlamp. Then exit the boot and unscrew the bolts next to the headlamp that hold it in place. While extracting the headlamp, remember to disconnect its connector. Now, with a cross-head screwdriver, unscrew the two screws that secure the bulb holder and replace the bulb itself. Reassemble everything by reversing the steps until fully reassembled. As you can see, it is a simple operation and within everyone's reach.

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Where Are the Fuses Located on the Seat Altea?
Where Are the Fuses Located on the Seat Altea?
Seat Altea (2004-2015 / MK 1) The fuses on the Seat Altea are divided between two fuse boxes located within the vehicle. The first is positioned behind the glove compartment, whic…
Where are the fuses located in the Seat Altea?
Where are the fuses located in the Seat Altea?
Seat Altea (2004-2015 / MK 1) Any fuse in the Seat Altea is located inside one of the two fuse boxes installed within the vehicle: the first is behind the glove compartment, which…
Fuse Box of the Seat Altea
Seat Altea (2004-2015 / MK 1) This model of vehicle has two fuse boxes; the first is located in the cabin on the left side just below the steering column and is protected by a pla…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos