Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you remove the rear seats of the Seat Ibiza?

Model: Seat Ibiza 6K - Years 1993-2002
Part: Seat

In order to remove the rear seats of the Seat Ibiza you have to lift them from the front with your hand and arrange them so that you can have access to their underlying pins. Here it will be necessary to loosen the two screws that fix the pins to the seats and allow them to be raised and lowered. Once the screws have been loosened, the seat can be removed completely. The same operation must also be performed on the other side. Once the old seats have been removed, it will be possible to replace them with new spare parts, fixing the new seats by doing the operation in reverse.

Posted on 7 November 2021 by ScegliAuto

Video tutorial

Related tutorials

How to remove the front headlight bulbs on Seat Ibiza
How to remove the front headlight bulbs on Seat Ibiza
Seat Ibiza (2008-2017 / 6J, 6P) How to remove the front bulbs of our Seat Ibiza? Let's see how the bulbs placed in the headlights are removed. We lift the front hood, then we find t…
Seat Ibiza 6 j fuse diagram information
Seat Ibiza 6 j fuse diagram information
Seat Ibiza (2008-2017 / 6J, 6P) In this video you will find information about the Seat Ibiza fuses; the latter are reported on a specific diagram. The fuses of the Seat Ibiza, are p…
Where is the fuse box located in the Seat Ibiza 2012?
Where is the fuse box located in the Seat Ibiza 2012?
Seat Ibiza (2008-2017 / 6J, 6P) If you own a 2012 Seat Ibiza and are looking for a guide to help you quickly find the box containing all the various fuses of the car, then all you h…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos