Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Ibiza
    4. : Suspension lubrication to eliminate squeaking

Seat Ibiza - Video tutorial

Model: Seat Ibiza 6L - Years 2002-2009
Part: Suspensions
Operation: Suspension lubrication to eliminate squeaking

If you hear squeaks coming from the rear suspension while driving on a bumpy road, one of the causes could be due to hardening or encrustation of the rubber elements in the suspensions themselves. This circumstance is more frequent in those vehicles that during the winter are found to circulate on snow-covered roads and on which salt is sprinkled: the corrosive action of the latter could alter the suspension system. A first solution to eliminate or at least reduce these squeaks is to lubricate the silent blocs of the oscillating arms of the rear suspension.


Posted on 2 August 2023 by ScegliAuto

This video is currently unavailable


How to replace the bushings of the front suspension of the Seat Ibiza
Seat Ibiza (2002-2009 / 6L) The guide shows how to replace the Seat Ibiza front suspension bushings. For this operation it is necessary to use a special tool to extract the old
Replacement of the oscillating arm silentblock bush
Seat Ibiza (2002-2009 / 6L) The failure of the rubber present inside the suspension arm bushing is a fairly recurring defect but it is possible to remedy it without replacing th
How to calibrate the handbrake in the Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) In this tutorial we can see how to calibrate the handbrake in the Seat Ibiza, a very simple and fast operation, to be carried out for example after r

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos