Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the oscillating transverse arm in the Seat Ibiza?

Model: Seat Ibiza 6P, 6J - Years 2008-2017
Part: Control arm

To replace the control arm on the Seat Ibiza, the steps are as follows. First, we need to remove the wheel, the wheel arch liner, and the brake disc along with the corresponding brake pads to have enough working space. As shown in the video, we first unscrew the three bolts closest to the wheel, then remove the other two bolts positioned at each end of the control arm. Once this is done, we can proceed with the replacement of the control arm by following the same disassembly procedures in reverse. After replacing it, we can reassemble the disc, the brake pads, and everything that is part of the wheel component group.

Posted on 24 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Wishbone Joint on a Seat Ibiza?
How to Replace the Wishbone Joint on a Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) To replace the wishbone joint on a Seat Ibiza, loosen the bolts securing the wheel and remove it. Next, loosen the bolts connecting the ball joint to…
Replacing Silentblock Bush on Wishbone
Replacing Silentblock Bush on Wishbone
Seat Ibiza (2002-2009 / 6L) The failure of the rubber inside the silentblock bush of the suspension wishbone is a common defect, but it is possible to remedy this without replac…
How to Replace the Wipers on a Seat Ibiza
How to Replace the Wipers on a Seat Ibiza
Seat Ibiza (2008-2017 / 6P, 6J) In this video tutorial, you will see the steps to remove and replace the front wipers on a Seat Ibiza. First, move to the front of your car and lift …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos