Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Wishbone Joint on a Seat Ibiza?

Model: Seat Ibiza 6L - Years 2002-2009
Part: Checks and maintenance

To replace the wishbone joint on a Seat Ibiza, loosen the bolts securing the wheel and remove it. Next, loosen the bolts connecting the ball joint to the wishbone. Once all the fastening elements are removed, you can take out the ball joint. After it has been removed, insert a new ball joint. This should then be secured by reinstalling all the previously removed bolts. After the replacement, reinstall the wheel.

Updated on 24 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Silentblock Bush on Wishbone
Replacing Silentblock Bush on Wishbone
Seat Ibiza (2002-2009 / 6L) The failure of the rubber inside the silentblock bush of the suspension wishbone is a common defect, but it is possible to remedy this without replac…
How do you replace the oscillating transverse arm in the Seat Ibiza?
How do you replace the oscillating transverse arm in the Seat Ibiza?
Seat Ibiza (2008-2017 / 6P, 6J) To replace the control arm on the Seat Ibiza, the steps are as follows. First, we need to remove the wheel, the wheel arch liner, and the brake disc …
Disassembly of the rear windshield wiper of the Seat Ibiza
Disassembly of the rear windshield wiper of the Seat Ibiza
Seat Ibiza (2008-2017 / 6P, 6J) Today we will discover the steps that will allow us to disassemble and replace the rear windshield wiper or rear wiper of the Seat Ibiza. First, move…

Other guides you may be interested in

    Frequently Asked Questions

    • Ibiza 2008-2017 - Where is the power steering fluid reservoir located on the Seat Ibiza? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos