Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Ibiza
    4. : How to replace the bushings of the front suspension of the Seat Ibiza

Seat Ibiza - Video tutorial

Model: Seat Ibiza 6L - Years 2002-2009
Part: Bushings
Operation: How to replace the bushings of the front suspension of the Seat Ibiza

The guide shows how to replace the Seat Ibiza front suspension bushings. For this operation it is necessary to use a special tool to extract the old bushing. The first step is to lift the vehicle and secure it. Once the front wheel has been mounted, on the side to be operated, it is necessary to remove the suspension control arm by unscrewing the anchoring bolts to the frame and to the disc assembly. Blocked the suspension arm on a vice, mount the bushing extractor and extract the piece to be replaced. Grease the bush housing and the bush itself; install the part mounting kit and insert it into place. Carry out the same operation on the frame bushings. Reassemble the suspension arm and all disassembled parts.


Posted on 21 May 2024 by ScegliAuto



Suspension lubrication to eliminate squeaking
Seat Ibiza (2002-2009 / 6L) If you hear squeaks coming from the rear suspension while driving on a bumpy road, one of the causes could be due to hardening or encrustation of the
Replacement of the oscillating arm silentblock bush
Seat Ibiza (2002-2009 / 6L) The failure of the rubber present inside the suspension arm bushing is a fairly recurring defect but it is possible to remedy it without replacing th
How to install the radiator grille on the Seat Ibiza 6J.
Seat Ibiza (2008-2017 / 6P, 6J) In this video, we see how to install the radiator grille on the Seat Ibiza 6J. First, we need to remove the two pressure screws located at the top of

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos