Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Seat Ibiza

Model: Seat Ibiza 6L - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Warning light – error code

See other generations:
Video tutorial

After changing the engine oil and the corresponding filter on this vehicle, you need to update and reset the warning light that has illuminated on the instrument cluster. To do this, follow the instructions below.

Once seated in the driver's seat, locate the reset button on the lower right side of the dashboard. Press and hold this button while simultaneously turning on the ignition.

Wait about 10 seconds until the oil change indicator starts to flash. Release the button and press it again for a second to complete the reset.


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a 2014 Seat Ibiza
How to Reset the Service Light on a 2014 Seat Ibiza
Seat Ibiza (2008-2017 / 6J, 6P) To correctly reset the service light on the instrument cluster of your 2014 Seat Ibiza, follow these simple steps. First, enter the cabin and take yo…
How to Reset the Service Light on a 2015 Seat Ibiza?
How to Reset the Service Light on a 2015 Seat Ibiza?
Seat Ibiza (2008-2017 / 6J, 6P) The procedure to reset the service light on a 2015 Seat Ibiza is very simple and applies to all Seat Ibiza vehicles produced between 2008 and 2017, a…
How to Reset the Service Light on the 2020 Seat Ibiza?
How to Reset the Service Light on the 2020 Seat Ibiza?
Seat Ibiza (2017-2026 / KJ, 6F) In this video tutorial, you will learn how to reset the service light on the 2020 Seat Ibiza. For those opting for a DIY approach, this is certainly …

Other guides you may be interested in

    Frequently Asked Questions

    • Ibiza 2008-2017 - What does the "Insp" light on a Seat Ibiza mean? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos