Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate the immobiliser on the Seat Ibiza?

Model: Seat Ibiza 6L - Years 2002-2009
Part: Checks and maintenance

If inserting the key and turning it to start the car does not result in recognition, the immobiliser will prevent the car from starting. This device stops the car from starting when its key is not recognised. To deactivate this device on the Seat Ibiza, connect a diagnostic tool to the vehicle's OBD port, located near the steering column. Once connected, follow the procedure shown in the video and disconnect the tool; after completing the procedure, check that everything is functioning.

Updated on 2 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you deactivate the passenger airbag of the Seat Ibiza?
How do you deactivate the passenger airbag of the Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) In order to deactivate the passenger airbag of the Seat Ibiza, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be…
How to Deactivate the Passenger Airbag in a Seat Ibiza?
How to Deactivate the Passenger Airbag in a Seat Ibiza?
Seat Ibiza (2017-2026 / 6F, KJ) In this tutorial, you will see how to deactivate the passenger airbag in a Seat Ibiza, a very simple operation to perform, for example, after placing…
How to Activate and Deactivate the Passenger Airbag on a Seat Ibiza
How to Activate and Deactivate the Passenger Airbag on a Seat Ibiza
Seat Ibiza (2008-2017 / 6P, 6J) Let's see through this useful video tutorial today how to activate or deactivate the passenger airbag on a Seat Ibiza, fourth generation model produc…

Other guides you may be interested in

    Frequently Asked Questions

    • Ibiza 2008-2017 - Where is the power steering fluid reservoir located on the Seat Ibiza? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos