Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Key Battery of the Seat Ateca

Model: Seat Ateca MK 1 - Years 2016-2025
Part: Key

When the Seat Ateca does not open, the first suspect is the remote control, particularly its battery which may be flat. Take the remote and open it; it is a snap-fit, so open the casing firmly - but without excessive force. Using a pen or a small screwdriver, remove the button cell battery, which is a common CR2032, available for a few pounds at a newsagent or supermarket. Be careful to insert it back in the correct polarity. At this point, simply reassemble the casing, securing the clips, and you're done.

Updated on 20 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Key Battery of a Seat Ateca
How to Replace the Key Battery of a Seat Ateca
Seat Ateca (2016-2025 / MK 1) Begin by opening your key fob using the designated button. You can also use your hands to lift the rear cover where the battery is located, so no spe…
How to Replace the Key Fob Battery on a Seat Ateca
How to Replace the Key Fob Battery on a Seat Ateca
Seat Ateca (2016-2025 / MK 1) In this tutorial, see how to replace the battery in a Seat Ateca key fob. Start by pressing the release button to open the key, then lever off the re…
How to Change the Key Battery of a Seat Ateca
How to Change the Key Battery of a Seat Ateca
Seat Ateca (2016-2025 / MK 1) When the remote for opening a vehicle stops working, most of the time the cause is the battery inside that has run out. In this case, it needs to be …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos