Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Altea
    4. : How to remove the car radio from the Seat Altea.

Seat Altea - Video tutorial

Model: Seat Altea MK 1 - Years 2004-2015
Part: Car stereo
Operation: How to remove the car radio from the Seat Altea.

In the following guide, we will describe step by step all the necessary steps to correctly and independently dismantle the factory radio of your Seat Altea. First of all, you need to turn off the car and remove the entire plastic cover located around the radio. Then, get a Phillips screwdriver and use it to unscrew all the screws present. Once this simple operation is completed, gently pull the radio towards you and disconnect the electrical cable located at the back to finally complete its removal.


Posted on 1 August 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos