Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Arona
    4. : How do you use the inflation kit on the Seat Arona?

Seat Arona - Video tutorial

Model: Seat Arona MK 1 - Years 2017-2024
Part: Wheel
Operation: How do you use the inflation kit on the Seat Arona?

In this video, we see how to use the inflation kit in case of need on the Seat Arona: they all look more or less the same, but each one has its own specificities, so it's better to check the instructions in the user manual before using it. The cable goes directly into the cigarette lighter socket. We unscrew the dust cap and use the appropriate tool to unscrew and remove the valve. We shake the canister with the sealant and then pour the entire contents into the valve; we connect the compressor to the valve and start it until the pressure in bars indicated on the label located on the driver's door thickness is reached. We put the cap back on and we are ready to go to the nearest tire repair shop.


Posted on 24 August 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos