Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform a Service Reset on a Seat Ateca

Model: Seat Ateca MK 1 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Warning light – error code

Video tutorial

Thanks to today's video tutorial, learn how to reset the service light on a first-generation Seat Ateca, produced from 2016 to 2023. This operation should be performed after every engine oil change on your vehicle, but let's go through the procedure.

First, with the engine off, press and hold the "0.0/SET" button located at the centre of the speedometer, then turn on the vehicle's ignition without starting the engine.

Once done, you will see a request to perform the reset appear on the information display, then release the button and press it again briefly to confirm and execute the reset.


Updated on 17 August 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Seat Ateca?
How to Reset the Service Light on a Seat Ateca?
Seat Ateca (2016-2025 / MK 1) In this tutorial, you will learn how to reset the service light on a Seat Ateca, a very simple and quick operation. Before doing this, ensure that yo…
How to reset the service on the Seat Ateca?
How to reset the service on the Seat Ateca?
Seat Ateca (2016-2025 / MK 1) In this tutorial, you will see how to reset the service on the Seat Ateca, a very simple and quick operation. Before doing this, ensure you have comp…
How to Reset the Service Light in a Seat Ateca?
How to Reset the Service Light in a Seat Ateca?
Seat Ateca (2016-2025 / MK 1) This tutorial shows how to reset the service light in a Seat Ateca, a straightforward and quick operation to perform only after completing all schedu…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos