Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Ibiza
    4. : How to replace the rear lights in the Seat Ibiza.

Seat Ibiza - Video tutorial

Model: Seat Ibiza KJ - Years 2017-2024
Part: Tail light
Operation: How to replace the rear lights in the Seat Ibiza.

In this video tutorial, the step-by-step procedure for replacing the rear lights bulbs of the Seat Ibiza KJ is shown. The procedure for replacing the bulb of the rear headlights is as follows: first, you need to open the trunk, then inside the trunk, at the height of the headlight, there is a cover that needs to be removed. Inside the cover, there is a white spring screw that can be unscrewed by hand. After unscrewing and removing it, you need to pull the headlight outwards, moving it a bit to the right and left to detach it. Once the headlight is extracted, you need to disconnect the connectors. After disconnecting the headlight, you need to remove the 5 clips located behind it in order to remove the cover and replace the bulb. Once the bulbs are replaced, put the rear cover of the headlight back in place, then reattach the headlight and screw the spring screw back in and close it with the cover.


Posted on 11 November 2023 by ScegliAuto



How to remove the rear bumper on Ibiza
Seat Ibiza (2002-2009 / 6L) Remove the rear bumper on Seat Ibiza? We disassemble the rear lights to disassemble the bumper, let's see. We open the tailgate of the luggage compar
How to remove the rear lights in the Seat Ibiza?
Seat Ibiza (2008-2017 / 6P, 6J) In this tutorial, we can see how to remove the rear lights in the Seat Ibiza, an extremely simple and fast operation. First of all, make sure that th
How to open the exterior mirrors with the switch of a Seat Ibiza
Seat Ibiza (2008-2017 / 6P, 6J) Before we can start, we will have to go and sit in the driver's seat of our Seat Ibiza. Let's start by activating the instrument panel by turning the

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos