Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Interior Roof Light Bulbs

Model: Seat Alhambra MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Interior dome light bulb

See other generations:
Video tutorial

Using a screwdriver, gently pry open the cover to access the two screws that secure the entire panel with lights and controls for the driver's area. Once the entire panel is removed from the roof, you can replace the bulbs from the rear by simply rotating them.

For the lights in the rear passenger area, again using a screwdriver, remove the lights and disconnect the connectors. Now, remove the opaque plastic in front of the light and replace the bulbs, reconnect the connectors, and reposition everything back onto the roof.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

How to replace the fog light bulbs in the Seat Alhambra?
How to replace the fog light bulbs in the Seat Alhambra?
Seat Alhambra (2010-2020 / MK 2) In this tutorial we can see how to replace the fog light bulbs in the Seat Alhambra, a very simple and quick operation. First of all, make sure that …
How to Change the Rear Light Bulb on a Seat Alhambra - Volkswagen Sharan
How to Change the Rear Light Bulb on a Seat Alhambra - Volkswagen Sharan
Seat Alhambra (2010-2020 / MK 2) This guide outlines the steps to remove and replace the rear light bulb on a Seat Alhambra, as well as a Volkswagen Sharan. First, open the boot lid …
Replacing the Handle on Seat Alhambra
Seat Alhambra (2000-2010 / MK 1) Let's look at replacing the handle on the Seat Alhambra. Open the door of the Seat Alhambra and locate the parts to disassemble. Unscrew the screw lo…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos