Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Reset Inspection on a Seat Toledo

Model: Seat Toledo MK 4, KG - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Warning light – error code

See other generations:
Video tutorial

Today, let’s see how to reset the inspection request on a Seat Toledo, fourth generation model produced from 2012 to 2019. Start the operation by pressing and holding the "0.0/SET" button located at the centre of the speedometer, then turn the ignition to the first position.

After this, the service reset request will appear on the information display.

Wait a few seconds until the inspection reset message appears, then release the button and press it again to execute the inspection reset.


Updated on 23 September 2026 by ScegliAuto


Related tutorials

How to change the engine air filter of the Seat Toledo
How to change the engine air filter of the Seat Toledo
Seat Toledo (2012-2019 / MK 4, KG) In the following guide you will find the description of all the steps you need to apply to safely replace the engine air filter of your third series …
How to Reset the Tyre Pressure Light on the Seat Toledo?
How to Reset the Tyre Pressure Light on the Seat Toledo?
Seat Toledo (2012-2019 / MK 4, KG) In this tutorial, you will see how to reset the tyre pressure light on the Seat Toledo, a very simple and quick operation that should only be perform…
Resetting the service light on the Seat Toledo.
Resetting the service light on the Seat Toledo.
Seat Toledo (2012-2019 / MK 4, KG) Below we will see the procedure that will allow us to reset the service light for the regular maintenance of the engine oil change in the Seat Toledo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos