Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlight Bulb on a Seat Altea

Model: Seat Altea MK 1 - Years: 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Headlight bulb

Video tutorial

Today's steps will show you how to remove and replace the front headlight bulb on a Seat Altea, following the instructions below. First, open the bonnet of the vehicle and start by removing the plastic protective cover for the bulbs, located behind the headlight; then disconnect the electrical connector and unclip the metal spring to remove the dipped beam bulb, as illustrated in the video.

Now install the new bulb into the headlight unit, ensuring it is the correct type and has the same fitting; reconnect and finally secure the cover!


Updated on 11 October 2026 by ScegliAuto


Related tutorials

Replacing the Front Headlamp Bulb on the Seat Altea
Replacing the Front Headlamp Bulb on the Seat Altea
Seat Altea (2004-2015 / MK 1) The following steps will show you how to dismantle and replace the bulb in the front headlamp of the Seat Altea, following the instructions below. Fi…
Replacing the Bulb of the Rear Light on the Seat Altea
Replacing the Bulb of the Rear Light on the Seat Altea
Seat Altea (2004-2015 / MK 1) Here are the useful steps to remove and replace the bulb of the rear light on the Seat Altea. First, open the boot lid and begin unscrewing the fixin…
How to Replace the Front Headlamp Bulb on a Seat Altea
How to Replace the Front Headlamp Bulb on a Seat Altea
Seat Altea (2004-2015 / MK 1) To replace the front headlamp bulb on a Seat Altea, first remove the headlamp from its housing. To do this, undo the upper and lower screws of the bu…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos