Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Door Panel of a 2018 Seat Leon?

Model: Seat Leon 5F, MK 3 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Door trim panel

See other generations:
Video tutorial

Removing the door panel of a 2018 Seat Leon is a necessary operation before removing the door from its hinges. The steps to follow are: -remove the cover of the opening handle; -unscrew the screw located behind; -unclip the panel from the bottom; -unscrew the central screw of the panel, located inside the space for the window opening buttons; -remove the panel; -disconnect the connector; The steps for removing the passenger side panel are the same as listed above, and this operation is valid for all Seat Leon models.


Updated on 14 October 2026 by ScegliAuto


Related tutorials

Removing the Door Panel on a Seat Leon
Removing the Door Panel on a Seat Leon
Seat Leon (2005-2013 / 1P) How to remove the door panel on a Seat Leon? Let's see how to do it. Use a plastic lever to remove the cover of the internal handle, and undo the scr…
How to Remove the Door Panel of a Seat Leon
How to Remove the Door Panel of a Seat Leon
Seat Leon (2012-2019 / 5F, MK 3) How do you remove the door panel of a Seat Leon? Let's see how to take off the door cover panel with the attached parts. To start, remove the cover f…
Removing the Front Door Panel of the Seat Leon
Removing the Front Door Panel of the Seat Leon
Seat Leon (2005-2013 / 1P) These brief steps will guide you through the process of removing the front door panel of the Seat Leon. First, open the front door of the vehicle and…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos