Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Cabin Heater Radiator on the Seat Alhambra

Model: Seat Alhambra MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Heater core

See other generations:
Video tutorial

Today's instructions will show you the procedure for removing and replacing the cabin heater radiator on the Seat Alhambra. First, get inside the cabin and start by removing the glove compartment and then the steering wheel, unscrewing the fixing screws; then remove the radio and climate control buttons to subsequently take out the entire dashboard, as illustrated in the video.

Now disconnect the heater radiator pipes by unscrewing the bracket screws to remove the entire block; replace the radiator and reassemble everything!


Updated on 18 October 2026 by ScegliAuto


Related tutorials

Replacing the Handle on Seat Alhambra
Seat Alhambra (2000-2010 / MK 1) Let's look at replacing the handle on the Seat Alhambra. Open the door of the Seat Alhambra and locate the parts to disassemble. Unscrew the screw lo…
Where are the fuses located in the Seat Alhambra?
Where are the fuses located in the Seat Alhambra?
Seat Alhambra (2010-2020 / MK 2) On board the Seat Alhambra, the fuse boxes are responsible for housing the fuses that regulate the operation of the devices installed in the vehicle:…
How to reset the service light on a Seat Alhambra?
How to reset the service light on a Seat Alhambra?
Seat Alhambra (2010-2020 / MK 2) In this tutorial, you will see how to reset the service light on a Seat Alhambra, a very simple and quick operation, to be done only after completing…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos