|
Do it yourself
| |||
| ||||
Filter change on a Skoda Kodiaq
Model: Skoda Kodiaq
MK 1
- Years:
2017, 2018, 2019, 2020, 2021, 2022, 2023
Video tutorial
In this video, we see how to change various filters on a Skoda Kodiaq: first, we need to lift the front part of the car and remove the protection that is fixed with T35 screws at the front and T40 at the rear. Place a tray under the oil filter and loosen the drain plug with a 19mm wrench. Using a special wrench, unscrew the oil filter, then install the new one lubricating the gasket with new oil and tighten to 20 Nm. Once the oil has drained properly, install a new plug and a new gasket tightening to 35 Nm. The air filter is housed in a compartment with a cover on the top of the engine, with a cover fixed by 7 T25 screws. Remove the cover, remove the old filter, and clean the compartment with a cloth or vacuum cleaner. Insert the new filter respecting its orientation. To replace the cabin filter, open the glove compartment and press the side clips (no need to unscrew anything). Release the cabin filter cover with a flathead screwdriver, remove the old filter, and clean the compartment well from dust and residue. Insert the new filter with the arrows pointing downwards. Close the cover and put the glove compartment back in place. Reassemble the lower protection, lower the car, and fill with new oil, as per the manufacturer's specifications, checking the quantity multiple times during filling.
Posted on 8 September 2025 by ScegliAuto
Related tutorials
Skoda Kodiaq
(2017-2023 /
MK 1)
If it is time to replace the cabin air filter in your first-generation Skoda Kodiaq, then all you have to do is read the following guide and follow t…
Skoda Kodiaq
(2024-2026 /
MK 2)
You can replace the remote battery on a Škoda Kodiaq by sliding the key out from the top of the device: at this point, you can lever inside the key h…
Skoda Kodiaq
(2017-2023 /
MK 1)
In this very short video guide, we will see how to replace the battery (CR2025) in the remote of a Skoda Kodiaq, first generation model produced from…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.044
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |