Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Infotainment System on Skoda Vehicles

Model: Skoda Octavia MK 4, NX - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Onboard computer

See other generations:
Video tutorial

To reset the Skoda infotainment system, first attempt a soft reset for minor bugs, which does not erase any settings, by holding down the power button for about 15 seconds. The screen will turn off and back on, displaying the Skoda logo.

If this does not work, perform a hard reset, which will erase all customisations and return to factory settings. With the engine running (to avoid battery drain), go to the 'settings' menu, find 'system', and select 'reset factory settings'. You will be asked for confirmation; proceed, and it will take a few minutes to complete.

If the screen does not turn on, disconnect the negative battery terminal for 10 minutes; this will also reset the clock and ECU settings. Check for firmware updates that may resolve many issues.


Posted on 12 May 2026 by ScegliAuto


Related tutorials

Skoda Octavia (2019-2026 / MK 4, NX) This guide describes the procedure to reset the infotainment system for the Skoda Octavia MK4. Note that this procedure is not valid for earlier mode…
Skoda Octavia (2012-2019 / 5E, MK 3) Today, you will see, through this brief video guide, how to perform a forced restart of the infotainment system on a Skoda Octavia, third generation …
Skoda Octavia (2012-2019 / 5E, MK 3) Today, let's see how to reset the infotainment system to factory settings on a Skoda Octavia 3. Restoring the infotainment system is straightforward …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos