Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Yeti
    4. : Skoda Yeti headlight bulb replacement

Skoda Yeti - Video tutorial

Model: Skoda Yeti MK 1 - Years 2009-2017
Part: Headlight bulb
Operation: Skoda Yeti headlight bulb replacement

We see in this video the instructions to be able to remove and replace the dipped beam headlight bulb on a Skoda Yeti. First of all, we open the car's bonnet and remove the plastic protection cap of the light bulb, by unscrewing it counterclockwise; after which we disconnect the electrical connector of the low beam and high beam bulb and unhook the metal clip in order to remove it, as shown in the video. At this point let's replace it with the new one, of the right type (in this case with H4 connection), and reassemble everything, applying the reverse procedure!


Posted on 9 January 2024 by ScegliAuto



Replacement of Skoda Yeti license plate bulbs.
Skoda Yeti (2009-2017 / MK 1) Today, in this video tutorial, we will see instructions on how to disassemble and replace the license plate bulbs of the Skoda Yeti. First, let's mov
How to reset the service indicator on the 2012 Skoda Yeti
Skoda Yeti (2009-2017 / MK 1) If you own a 2012 Skoda Yeti and want to proceed with the manual reset of the service light on your own, all you have to do is follow the steps descr
What is the fuse diagram for the Skoda Yeti?
Skoda Yeti (2009-2017 / MK 1) If a device in our Skoda Yeti has suddenly stopped working, the first thing we can do is check the status of the corresponding fuses, the diagrams of

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos