Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Skoda
    3. :
  3. Fabia
    4. : Skoda Fabia dashboard disassembly

Skoda Fabia - Video tutorial

Model: Skoda Fabia Mark1, 6Y - Years 1999-2007
Part: Dashboard
Operation: Skoda Fabia dashboard disassembly

In this video tutorial we will see the steps on how to disassemble the dashboard of a Skoda Fabia. First we get inside the car and start by removing the glove box, opening it and going to unscrew all the fixing screws; then we go to unscrew the screws that we find in the plastic under the steering wheel and we go to remove it. At this point we remove the car radio, inserting the appropriate tools, and extract it, disconnecting the electrical connector on the back; then we unscrew the lateral fixing screws in order to remove the plastic frames and the air conditioning controls. We just have to follow the video to the end!


Posted on 28 February 2024 by ScegliAuto



How to remove the glove compartment of a Skoda Fabia
Skoda Fabia (1999-2007 / Mark1, 6Y) Before starting, we will have to open the front door of our Skoda Fabia. Let's start by opening the door of the glove compartment, then disengage and
Where is it and how to get to the fuse box of a Skoda Fabia?
Skoda Fabia (1999-2007 / Mark1, 6Y) The fuse box of our Skoda Fabia is located on the left side of the dashboard. In order to reach it, therefore, we will have to start by opening the f
Where is the OBD2 port located on the Skoda Fabia?
Skoda Fabia (1999-2007 / Mark1, 6Y) If you want to be able to find the OBD2 port located inside your Skoda Fabia first generation (year 1999-2007), all you have to do is read the follow

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos